Cisco Nexus 7000 Series Command Reference Manual page 169

L Commands
logging tunnel all
To configure the generation of system logs for all TE tunnel events, use the logging tunnel all command.
To stop logging these system messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE interface configuration (config-te-if)
TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
This feature can be configured either for an individual TE tunnel or all the TE tunnels.
Examples This example shows how to configure system logs for all TE tunnels when any event occurs.
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging tunnel all
switch(config-te)#
OL-24994-01
logging tunnel all
no logging tunnel all
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging tunnel all
1129