Cisco Nexus 7000 Series Command Reference Manual page 184

mdt source
mdt source
To configure the interface that is used to set the multicast virtual private network (VPN) data multicast
distribution tree (MDT) source address, use the mdt source command.
Syntax Description interface
Defaults None
Command Modes
Configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to configure the interface that is used to set the multicast VPN data multicast
distribution tree (MDT) source address:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt source interface
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1136
mdt source interface
no mdt source interface
Interface used to set the multicast VPN data multicast distribution tree
(MDT) source address.
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
M Commands
OL-24994-01