Cisco Nexus 7000 Series Command Reference Manual page 426

table-map
table-map
To configure a table map, use the table-map command. To return to the default setting, use the no form
of this command.
Syntax Description
table-map-name
Defaults None
Command Modes Table map configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure a table map:
switch# configure terminal
switch(config)# table-map TableMap1
switch(config-tmap)
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1222
table-map table-map-name
no table-map table-map-name
Table map name. The maximum size is 40 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
T Commands
OL-24994-01