Cisco Nexus 7000 Series Command Reference Manual page 294

signalling refresh reduction ack-delay
signalling refresh reduction ack-delay
To configure the maximum amount of time the Resource Reservation Protocol (RSVP) holds on to an
acknowledgement before sending it, use the signalling refresh reduction ack-delay command. To
return to the default settings, use the no form of the command.
Syntax Description
time
Defaults
0.25 second.
Command Modes RSVP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the maximum amount of time RSVP holds on to an
acknowledgment before sending it:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling refresh reduction ack-delay
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1226
signalling refresh reduction ack-delay time
no signalling refresh reduction ack-delay time
Hello interval in seconds.The range is from 2000 to 300000.
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01