Cisco Nexus 7000 Series Command Reference Manual page 176
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
mdt asm-use-shared-tree
mdt asm-use-shared-tree
To specify that a shared-tree [(*,G)] entry should be created for a default multicast distribution tree
(MDT) when the default MDT group is in PIM ASM mode, use the mdt asm-use-shared-tree
command.
Syntax Description
This command has no arguments or keywords.
Defaults
Default MDT group is in PIM ASM mode.
Command Modes
VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure the shared-tree [(*,G)] entry should be created for the default
MDT when the default MDT group is in PIM ASM mode:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt asm-use-shared-tree
switch(config-vrf)#
Related Commands
Command
show mvpn mdt route
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1128
mdt asm-use-shared-tree
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
M Commands
OL-24994-01
Advertisement
Table of Contents
