Cisco Nexus 7000 Series Command Reference Manual page 181

M Commands
mdt mtu
To configure the maximum transmission unit (MTU) associated with the multicast tunnel interfaces
created for the default and data multicast distribution tree (MDT) groups, use the mdt mtu command.
Syntax Description mtu-size
Defaults 1376
Command Modes
Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure the maximum transmission unit (MTU) associated with the
multicast tunnel interfaces created for the default and data MDT groups:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt mtu 600
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
OL-24994-01
mdt mtu mtu-size
no mdt mtu mtu-size
MTU value. The range is from 576 to 65535.
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mdt mtu
1133