Backup-Bw - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
B Commands
backup-bw
To specify whether this tunnel-te, when used as a backup tunnel, should provide bandwidth protection,
and how much, use the backup-bw command. To restore the system to its default condition, use the no
form of this command.
Syntax Description
bandwidth
Defaults
None
Command Modes
TE interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to associate the bandwidth with a backup tunnel:
switch# configure terminal
switch(config)# interface tunnel-te 2
switch(config-if-te)# backup-bw 1000
switch(config-if-te)#
Related Commands
Command
interface tunnel-te
OL-24994-01
backup-bw bandwidth
no backup-bw
Amount of allocatable backup bandwidth. The range is from 1 to
4294967295.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
backup-bw
113
Advertisement
Table of Contents
