Cisco Nexus 7000 Series Command Reference Manual page 411
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show running-config mpls ldp
To display the configuration status of the Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP) on the device, use the show running-config mpls ldp command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the running configuration status of MPLS LDP on the device:
switch# show running-config mpls ldp
!Command: show running-config mpls ldp
!Time: Mon Mar 14 01:49:48 2011
version 5.2(1)
feature mpls ldp
interface Ethernet8/1
mpls ip
mpls ldp configuration
discovery hello interval 2
discovery hello holdtime 10
Related Commands
Command
show mpls forwarding
statistics
OL-24994-01
show running-config mpls ldp
Modification
This command was introduced.
Description
Displays the Multiprotocol Label Switching (MPLS) Label Distribution
Protocol (LDP) traffic forwarding statistics.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show running-config mpls ldp
1333
Advertisement
Table of Contents
