Cisco Nexus 7000 Series Command Reference Manual page 175

M Commands
maximum-paths eibgp
To specify the maximum number of BGP VPNv4 multipaths for both eBGP and iBGP paths, use the
maximum-paths eibgp command
Syntax Description
parallel-paths
Defaults
1 parallel path is configured for both eBGP and iBGP paths.
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History Release
8.0(1)
Usage Guidelines
Use this command on PE devices and Route Reflectors in an MPLS topology.
This command does not require a license.
Examples This example shows how to specify the maximum number of BGP VPNv4 multipaths for both eBGP and
iBGP paths:
switch# configure terminal
switch(config)# feature bgp
switch(config)# router bgp 100
switch(config-router)# address-family vpnv4 unicast
switch(config-router-af)# maximum-paths eibgp 3
Related Commands Command
show bgp vpnv4
unicast
OL-24994-01
maximum-paths eibgp parallel-paths
no maximum-paths eibgp [parallel-paths]
Maximum number of multipaths for both eBGP and iBGP paths. The
default value is 1.
Modification
This command was introduced.
Description
Display the VPNv4 routes from the BGP table..
.
To remove the multipaths, use th no form of this command.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
maximum-paths eibgp
1127