Logic Functions - Festo CAMC-G-S3 Manual

4 Commissioning
The basic operating steps are described in the steps listed above.
SSF0: Safe speed
• For the SLS safety function, parameterise the function SSF0 according to your application
è Section 2.5.8.
SBC: Safe Brake Control
1. Parameterise the safety function SBC according to your application è Section 2.5.2.
2. In the example, delete the request by LIN_D40.
3. For "Terminate request", leave LIN_D49_RISING_EDGE.
4. Depending on your application, logic for the brake feedback may be necessary in the "Feedback"
tab.
4.6.9

Logic functions

The Advanced Logic Functions ALFx are not used in the example and therefore do not need to be activ­
ated on the "Logic functions" page.
190 Festo – GDCP-CAMC-G-S3-EN – 1406NH – English