Parametrisation With Cmd User Functions - Festo CPX-FB6 Manual

2. Commissioning

2.2.3 Parametrisation with CMD user functions

Fig. 2/21: "Anwenderfunktion" (User function) – boot attribute is set
2-50
User functions can be created in the CMD software. A user
function is a macro assigned with parameters.
The following options are available for parametrisation of the
CPX terminal with the aid of the user functions:
– The boot attribute for the user function is set
– The user function is started by the user program
The boot attribute for the user function is set
The function is carried out when the module starts up.
Festo P.BE-CPX-FB6-EN en 1207c