Auxiliary Supply +24 V [X40] - Festo CAMC-G-S3 Manual
Safety module
Hide thumbs
Also See for CAMC-G-S3:
- Translation of the original instructions (24 pages) ,
- Instructions | safety function, advanced safety (4 pages) ,
- Translation of the original instructions (4 pages)
Table of Contents
Advertisement
2
Product description of safety module CAMC-G-S3
2.9.4
Auxiliary supply +24 V [X40]
The auxiliary supply can be employed when using the acknowledgment contact C1/C2 or to supply
external, active sensors.
The safety module provides 24 V DC at the interface X40 with a maximum load capacity of 100 mA.
The output for the 24 V is protected against overloading and short circuits by a PTC.
Tab. A.13 Appendix A.1.7 describes the electrical data for the auxiliary supply.
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
129
Advertisement
Chapters
Table of Contents
