Table Of Contents - Camc-G-S3 - Festo CAMC-G-S3 Manual

CAMC-G-S3
Documentation
You will find information on the motor controller in the following documentation:
User documentation on the motor controller CMMP-AS-...-M3
Name, type
Hardware description,
GDCP-CMMP-M3-HW-...
Function descriptions,
GDCP-CMMP-M3-FW-...
Description FHPP,
GDCP-CMMP-M3/-M0-C-HP-...
Description CiA 402 (DS 402),
GDCP-CMMP-M3/-M0-C-CO-...
Description of CAM Editor,
P.BE-CMMP-CAM-SW-...
Description of safety module,
GDCP-CAMC-G-S1-...
Description of safety module,
GDCP-CAMC-G-S3-...
Description for exchange and pro­
ject conversion
GDCP-CMMP-M3-RP-...
Help for the FCT PlugIn CMMP-AS
SafetyTool Help
Tab. 3 Documentation on the motor controller CMMP-AS-...-M3
The documentation is available on the following media:
– CD-ROM (scope of delivery)
– Support Portal: è www.festo.com/sp
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
Table of contents
Assembly and installation of the motor controller CMMP-
AS-...-M3 for all variants/output classes (1-phase, 3-phase), pin
allocations, error messages, maintenance.
Functional description (firmware) CMMP-AS-...-M3, Instructions
on commissioning.
Control and parameterisation of the motor controller via the
FHPP Festo profile.
– Motor controller CMMP-AS-...-M3 with the following field­
busses: CANopen, PROFINET, PROFIBUS, EtherNet/IP, Devi­
ceNet, EtherCAT.
– Motor controller CMMP-AS-...-M0 with fieldbus CANopen.
Control and parameterisation of the motor controller via the
device profile CiA 402 (DS402)
– Motor controller CMMP-AS-...-M3 with the following field­
busses: CANopen and EtherCAT.
– Motor controller CMMP-AS-...-M0 with fieldbus CANopen.
Cam disc function (CAM) of the motor controller CMMP-
AS-...-M3/-M0.
Functional safety engineering for the motor controller CMMP-
AS-...-M3 with the safety function STO.
Functional safety engineering for the motor controller CMMP-
AS-...-M3 with the safety functions STO, SS1, SS2, SOS, SLS,
SSR, SSM, SBC.
Motor controller CMMP-AS-...-M3 as a replacement device for
previous motor controller CMMP-AS. Changes to the electrical
installation and description of project conversion.
User interface and functions of the CMMP-AS PlugIn for the
Festo Configuration Tool.
è www.festo.com
User interface and functions of the SafetyTools for paramet­
erisation of the safety module CAMC-G-S3.
11