Festo CAMC-G-S3 Manual page 297

B Reference list for control signals and parameters
Error management
No. Name
P20.38 [58-6] Error in cross-comparison for
processors 1 - 2
P20.3D [59-1] Failsafe supply/safe pulse
inhibitor
P20.3E [59-2] Error external power supply
P20.3F [59-3] Error internal power supply
P20.40 [59-4] Error management:
Too many errors
P20.41 [59-5] Error writing to diagnostic
memory
P20.42 [59-6] Error on saving parameter set
P20.43 [59-7] FLASH checksum error
P20.44 [59-8] Internal monitoring, processor
1 - 2
P20.45 [59-9] Other unexpected error
Tab. B.9 Error management
Diagnostic parameters
No. Name
P00.00 Parameter set version
P20.46 Error status, group 53 and 54:
P20.47 Error status, group 55 and 56:
P20.48 Error status, group 57 and 58:
P20.49 Error status, group 59:
Expert parameter
P02.2F Status of the digital inputs
P02.38 Status of the digital outputs
P02.39 Status of the digital outputs B
P02.3A Status of the digital inputs B
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
Description
Error response of the error 58-6. The error is
triggered if an impermissible deviation occurs
when comparing microcontrollers 1 and 2. Ex­
amples: different statuses of the inputs and out­
puts, or different safe speed values. Error 56-9 is
triggered in special cases where position values
deviate.
Error response of the error 59-1
Error reaction of the error 59-2
Error reaction of the error 59-3
Error reaction of the error 59-4
Error response of the error 59-5
Error response of the error 59-6
Error response of the error 59-7
Error response of the error 59-8
Error response of the error 59-9
Description
Parameter set version
Main error number 53 and 54 in the error field
Main error number 55 and 56 in the error field
Main error number 57 and 58 in the error field
Main error number 59 in the error field
Status of the digital inputs
Status of the digital outputs
Status of the digital outputs
Status of the digital inputs
297