Festo CAMC-G-S3 Manual page 281

A Technical appendix
PNU 282 FSM IO (FSM IO)
Subindex 01 Class: Var
CAMC-G-S3: Level at the inputs of the safety module.
Bit Signal
0 LOUT48
1 LOUT49
2 LOUT50
3 LOUT51
4 LOUT52
5 LOUT53
6 LOUT54
7 LOUT55
8 LOUT56
9 LOUT57
10 LOUT58
11 LOUT59
12 . 15 LOUT60 ... 63
16 LOUT64
17 LOUT65
18 LOUT66
19 LOUT67
20 LOUT68
21 LOUT69
22 ... 31 LOUT70 ... 79
Tab. A.41 PNU 282
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
Data type: uint32
Function
Logical status DIN40A/B
Logical status DIN41A/B
Logical status DIN42A/B
Logical status DIN43A/B
Logical status DIN44
Logical status DIN45; mode selector switch (1 of 3)
Logical status DIN46; mode selector switch (1 of 3)
Logical status DIN47; mode selector switch (1 of 3)
Logical status, error acknowledgment via DIN48
Logical status, restart via DIN49
Logical status, two-handed control device (pair of 2 x DIN4x)
Feedback, holding brake
Not assigned
Logical status of the output DOUT40
Logical status of the output DOUT41
Logical status of the output DOUT42
Logical status of the signal relay
Logical status of the brake control
Logical status of the SS1 control signal
Not assigned.
from FW 4.0.1501.2.1 Access: ro
281