Festo CAMC-G-S3 Manual page 303

B Reference list for control signals and parameters
CO no. Name
076D ioh_fsm_proj_ser
_hi
076E ioh_fsm_proj_ser
_mid
076F ioh_fsm_proj_ser
_lo
0770 ioh_fsm_proj_rev
_idx
0771 ioh_fsm_proj_sof
t_rev_idx
0772 srvc_fsm_dip_val
_std
0773 ioh_fsm_num
_entry_act
0774 ioh_fsm_num
_entry_max
0780 ioh_7segment
_fsm_ctrl
0781 ioh_7segment
_fsm_data
0782 ioh_fsm_mov
_vout_0_31
0783 ioh_fsm_mov
_vout_32_63
0784 ioh_fsm_mov
_mscfct_rx
0785 ioh_fsm_mov
_mscfct_tx
0786 ioh_fsm_mscfct
_rx_cnt
0787 ioh_fsm_mscfct
_tx_cnt
0788 ioh_fsm_din
_dout
0789 ioh_fsm_mov
_stat_arb
078B srvc_fsm_act
_gesamt_rev_idx
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
Type Unit Description
RW UINT32 Manufacturer-specific serial number of the planned
safety module: ASCII coding of the upper 4 decimal
places, e.g. 0x30303134 = '0014'
RW UINT32 Manufacturer-specific serial number of the planned
safety module: Medium longword
RW UINT32 Manufacturer-specific serial number of the planned
safety module: Lower longword
RW UINT32 Revision of the hardware of the planned safety mod­
ule
RW UINT32 Revision of the software of the planned safety mod­
ule
RO UINT32 Supplies the value of the DIP switch read after the
reset on the safety module/switch module
RO UINT32 Supplies the number of entries in the Errorlog
memory of the basic unit
RO UINT32 Supplies the maximum number of possible entries in
the Errorlog memory of the basic unit
RW UINT32 Control word to control the 7-segment display of the
safety module.
RW UINT32 Controls the 7-segment display of the safety module
RW UINT32 Internal status of the safety module (64-bit of the
system bus) Low word (Tab. B.6, VOUT 0 ... 31)
RW UINT32 Internal status of the safety module (64-bit of the
system bus) High word (Tab. B.6, VOUT 32 ... 64)
RW UINT32 Character received from the FCT. Input from USB,
Ethernet. Add read index, FIFO SYSTEM
RW UINT32 Character to be sent to FCT. Output to USB, Ethernet
FIFO SYSTEM
RO UINT32 Number of characters from the FCT in the USB buffer,
Ethernet FIFO SYSTEM
RO UINT32 Number of characters from the safety module for FCT
in the USB buffer, Ethernet FIFO SYSTEM
RO UINT32 Reading of the digital inputs of the safety module
RW UINT32 Setting/reading of the state machine safety module
RO UINT16 --
303