Festo CAMC-G-S3 Manual page 143

3 Mounting and installation
Assembling the safety module
1. Slide the safety module into the guides.
2. Tighten the screws with a torque of 0.4 Nm ± 10%.
Result: The front panel has conducting contact with the
housing.
Removing the safety module
1. Unscrew the screws.
2. Loosen the safety module by gently prying the front cover
or by pulling the counterplug just a few millimetres and
pulling it out of the slot.
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
Fig. 3.1 Mounting / removing
143