De-Commissioning And Disposal - Festo CAMC-G-S3 Manual

6 Service, repair, replacement, waste management
c) No stored data of the safety module to be replaced is available:
• Set the safety module to the factory setting, if it is not in the delivery status.
• Then proceed as for initial commissioning.
Independently of the variant a), b) or c), you must generate a validation report again, with a new valida­
tion code and new serial number of the safety module.
6.4

De-commissioning and disposal

Observe the information for dismantling the safety module in section 3.1.
Disposal
Observe the local regulations for environmentally appropriate disposal of electronic mod­
ules. The safety module is RoHS-compliant.
The material used in the packaging has been specifically chosen for its recyclability.
228 Festo – GDCP-CAMC-G-S3-EN – 1406NH – English