Festo CAMC-G-S3 Manual page 9

CAMC-G-S3
Notes on this documentation
This documentation is intended to help you safely work with the safety functions
– STO – Safe Torque Off
– SS1 – Safe Stop 1
– SS2 – Safe Stop 2
– SOS – Safe Operating Stop
– SLS – Safely-Limited Speed
– SSR – Safe Speed Range
– SSM – Safe Speed Monitor
– SBC – Safe Brake Control
in accordance with EN 61800-5-2 through the usage of the safety module CAMC-G-S3 for the motor
controller CMMP-AS-...-M3.
• In addition, always observe the general safety regulations for the CMMP-AS-...-M3.
The general safety regulations for the CMMP-AS-...-M3 can be found in the hardware
description "Mounting and installation", GDCP-CMMP-M3-HW-... è Tab. 3.
Observe the information regarding safety and on the requirements for product use in
Section 1.2.
Product identification
This documentation refers to the following versions:
– Safety module CAMC-G-S3, from revision 01 (overall revision 1.1)
– Motor controller CMMP-AS-...-M3 with firmware from version 4.0.1501.2.1 and hard­
ware version from 6.0 (CMMP-AS-C2-3A-M3, CMMP-AS-C5-3A-M3) or from 4.1
(CMMP-AS-C5-11A-P3-M3, CMMP-AS-C10-11A-P3-M3)
– FCT PlugIn CMMP-AS from version 2.4.x.x with SafetyTool from version 1.0.x.x
These are the first available of supported versions. In the case of more versions or the
replacement of the safety module, check whether the versions are compatible
è see documentation of the appropriate version used.
Rating plate (example)
1
CAMC-G-S3
1501331 XX
2 3
1) Part number of the safety module CAMC-G-S3
2) Permits traceability of the product
Tab. 1 Rating plate CAMC-G-S3
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English
5
P0012345
Rev XX [XX]
ESD
4
Function
1
Order code (type designation)
2
1)
Part number
3
Two-digit code for unique identification of the
2)
production date
4
Module revision (overall revision, i.e. combina­
tion of hardware and firmware states)
5
Continuous serial number
2)
9