Range Of Application And Certifications - Festo CAMC-G-S3 Manual

1 Safety and requirements for product use
If a malfunction is detected during the diagnostics, appropriate measures must be taken to maintain
the safety level.
Please note
The reaction of the safety module to detected faults can be parameterised accordingly,
e.g. activate the safety functions SS1 and SBC if there is a cross-circuit of safe input
signals.
Please note
Check whether cross-circuit detection of the input circle and the connection wiring is
required in your application.
If needed, use a safety switching device with cross-circuit detection to activate the
safety module or use the safe outputs of the safety module for the supply of passive
switching devices together with the corresponding monitoring functions of the safe
inputs.
1.2.4

Range of application and certifications

The motor controller with built-in safety module is a safety device in accordance with the EC Machinery
Directive 2006/42/EC; the motor controller has the CE logo.
Safety-orientated standards and test values, which the product must comply with and fulfil, can be
found in the section "Technical data" è Appendix A.1. The product-relevant EC directives and stand­
ards can be found in the declaration of conformity.
Certificates and declaration of conformity on this product can be found at
è www.festo.com/sp.
Festo – GDCP-CAMC-G-S3-EN – 1406NH – English 17