Installation
Range of application and certifications
Target group
Service
VI
The product fulfils the requirements of the EU directives and
is marked with the CE certification.
Standards and test values which the product must comply
with and fulfil can be found in the section "Technical ap-
pendix". The product-relevant EU directives can be found in
the declaration of conformity.
Certificates and declarations of conformity for this product
can be found at www.festo.com.
This manual is intended exclusively for technicians trained in
control and automation technology who have experience in
installing, commissioning, programming and diagnosing
programmable logic controllers (PLCs) and slaves on the
CANopen fieldbus.
Please consult your local Festo Service if you have any tech-
nical problems.
Festo P.BE-CTEU-CO-OP+MAINT-EN en 1101NH