Technical Requirements; Qualification Of The Specialized Personnel (Requirements For The Personnel); Range Of Application And Certifications; Quoted Guidelines And Standards - Festo CPX-FB39 Description

1 Safety and requirements for product use
1.2.1

Technical requirements

General conditions for the correct and safe use of the product, which must be observed at all times:
• Comply with the connection and ambient conditions specified in the technical data of the product
(è Appendix A.1) and for all connected components.
Only compliance with the limit values or load limits permits operation of the product in accordance
with the relevant safety regulations.
• Observe the notes and warnings in this documentation.
1.2.2

Qualification of the specialized personnel (requirements for the personnel)

This description is directed exclusively to technicians trained in control and automation technology,
who are experienced in:
– the installation, commissioning, programming and diagnosis of programmable controllers (PLCs)
and field bus systems
– the applicable regulations for operating safety-engineered systems
– the applicable regulations for accident prevention and industrial safety
– the documentation for the product.
1.2.3

Range of application and certifications

Standards and test values, which the product complies with and fulfils, can be found in the "Technical
data" section (è Appendix A.1). The product-relevant EU directives can be found in the declaration of
conformity.
Certificates and declaration of conformity on this product can be found at www.festo.com.
1.2.4

Quoted guidelines and standards

Issue status
ANSI/TIA-568-B.1-3:2003-02
IEC 60204-SER:2013-04
IEC 60204-1:2009-02
IEC 60529:2001-02
Tab. 1.1
Festo – P.BE-CPX-FB39-EN – 1504NH – English
IEC 61076-2:2011-06
IEEE 802.3:2012
ISO/IEC 11801:2008-09
9