Connecting The Power Supply; Cable For Power Supply - Festo CPV-D102 Elektronics Manual

1. Installation CPV−DI02 and CPV−CS02
1.5

Connecting the power supply

1.5.1 Cable for power supply

Festo P.BE−CPV−DI02−EN en 0704NH
Use a power supply cable with sufficient cross−sectional
·
area.
Avoid long distances between the power unit and the CPV
·
valve terminal. Long cables reduce the voltage supplied
by the power unit.
If necessary calculate the suitable cross−sectional area
·
and the maximum permitted cable length.
The power supply connection is in the form of a plug. The pin
assignment of the plug can be found on the following pages.
For connecting the power supply, use plugs from the Festo
range which correspond to the outer diameter of the cable
used (see appendix A.3).
1−25