H3C MSR810 Command Reference Manual page 370

Field
Input: 0 packets, 0 bytes, 0
dropps
Output: 0 packets, 0 bytes, 0
dropps
# Display brief information about interface MFR 0/0/2.
<Sysname> display interface mfr 0/0/2 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
MFR0/0/2
# Display brief information about the MFR interfaces in physically down state.
<Sysname> display interface mfr brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
MFR0/0/2
Table 68 Command output
Field
Brief information on interface(s)
under route mode
Interface
Link
Protocol
Description
Description
Number of incoming packets, number of incoming bytes, and number of
incoming packets discarded.
Number of outgoing packets, number of outgoing bytes, and number of
outgoing packets discarded.
Link Protocol Main IP
DOWN DOWN --
Link Cause
ADM Administratively
Description
Brief information about Layer 3 interfaces.
Interface name.
Physical link state of the interface:
• UP—The interface is physically up.
• DOWN—The interface is physically down.
• ADM—The interface has been shut down by using the shutdown
command. To restore the physical state of the interface, use the
undo shutdown command.
• Stby—The interface is a backup interface.
Data link layer protocol state of the interface:
• UP—The data link layer protocol of the interface is up.
• DOWN—The data link layer protocol of the interface is down.
• UP(s)—The data link layer protocol of the interface is up, but the
link is an on-demand link or does not exist. The (s) attribute
represents the spoofing flag. This value is typical of null interfaces
and loopback interfaces.
Partial or complete interface description set by using the description
command:
• If you do not specify the description keyword for the display
interface brief command, this field displays only the first 27
characters of the interface description.
• If you specify the description keyword for the display interface
brief command, this field displays the complete interface
description.
358
Description