Display Ppp Mp - H3C MSR810 Command Reference Manual

Msr router series comware 7 layer 2 - wan access
Hide thumbs Also See for MSR810:
Table of Contents

Advertisement

Field
Physical
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0)
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0)
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0)
Brief information on interfaces in route
mode
Link: ADM - administratively down;
Stby - standby
Protocol: (s) - spoofing
Interface
Link
Protocol
Primary IP
Description
Cause

display ppp mp

Use display ppp mp to display MP information for MP-group interfaces.
Syntax
display ppp mp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its number. If you do not specify
this option, the command displays MP information for all interfaces.
Description
Physical type of the interface.
Traffic statistics of the interface output queues.
Brief information about Layer 3 interfaces.
Link status:
ADM—The interface has been administratively shut down. To
recover its physical state, use the undo shutdown command.
Stby—The interface is operating as a backup interface. To
see the primary interface, use the display interface-backup
state command in High Availability Command Reference.
Indicates the line protocol is UP, but the physical link is an
on-demand link or is not present.
Abbreviated interface name.
Physical link state of the interface. This field for a VT interface can
only be DOWN.
Line protocol state of the interface. This field for a VT interface can
only be DOWN.
Primary IP address of the interface.
Interface description configured by using the description
command. If you do not specify the description keyword,
the display interface brief command displays a maximum of 27
characters of the description. If you specify the description
keyword, the command displays the complete description.
Causes for the physical state of the interface to be Down.
Not connected indicates no physical link exists (possibly because
the network cable is disconnected or faulty).
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents