Interface Dialer; Mtu - H3C MSR810 Command Reference Manual

Field
Description
Cause
Related commands
reset counters interface

interface dialer

Use interface dialer to create a dialer interface and enter its view, or enter the view of an existing
dialer interface.
Use undo interface dialer to delete a dialer interface.
Syntax
interface dialer number
undo interface dialer number
Default
No dialer interface exists.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the number of the dialer interface, in the range of 0 to 1023.
Usage guidelines
A dialer interface has a fixed baud rate of 64000 bps.
Examples
# Create Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1

mtu

Use mtu to set the maximum transmission unit (MTU) of a dialer interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of dialer interfaces is 1500 bytes.
Description
Description of the interface.
Reason why a physical link is down. If the port has been shut down by
using the shutdown command, this field displays Administratively. To
restore the physical state of the interface, use the undo shutdown
command. Not connected indicates no physical connection due to
absence or failure of a network cable.
309