H3C MSR810 Command Reference Manual page 168

Link Layer 3: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 4: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 5: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 6: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 7: TEI = NONE, State = TEI_UNASSIGNED
Link Layer 8: TEI = NONE, State = TEI_UNASSIGNED
Network Layer: 1 connections
Connection 1:
CallID: 0x0001, State: ACTIVE, CES: 1, Channel: 0x00000001
TEI: 65
Calling_Num[:Sub]: 2014:1325
Called_Num[:Sub]: 50401:24136
# Display call information for PRI interface Serial 2/3/0:15.
<Sysname> display isdn call-info interface serial 2/3/0:15
Serial2/3/0:15(User-side):
Link Layer 1: TEI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Network Layer: 1 connections
Connection 1:
CallID: 0x0000ffff, State: ACTIVE, CES: 1, Channel: 0x00200000
TEI: 0
Calling_Num[:Sub]: 8306001
Called_Num[:Sub]: 8305001
Table 26 Command output
Field
Bri2/4/0(User-side): ACTIVE
Link Layer
TEI
Description
Physical layer activation state of the interface:
• ACTIVE—The physical layer is active.
• DEACTIVE—The physical layer is inactive.
The command displays the physical layer activation state only for BRI
interfaces. The physical layer of a BRI interface is activated only when it
receives an activation request from Q.931. However, the physical layer
of a PRI interface does not require an activation request. It becomes
active when the physical link comes up.
The ISDN role of the interface is bracketed.
Data link connections on the ISDN interface. ISDN establishes a
connection for each terminal and uses a TEI to identify each connection.
A BRI interface can have eight connections, but a PRI interface can have
only one connection.
Terminal endpoint identifier that identifies an end-user terminal such as
an ISDN phone. TEIs are assigned by the network side.
156