Default - H3C MSR810 Command Reference Manual

Use undo bundle min-active links to restore the default.
Syntax
bundle min-active links number
undo bundle min-active links

Default

The minimum number of Selected interfaces required for bringing up an HDLC link bundle is not set.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
number: Specifies the minimum number of Selected interfaces required for bringing up an HDLC link
bundle interface. The value range for this argument is 1 to 16.
Usage guidelines
The value specified by using this command cannot be gr eater than the value specified by using
the bundle max-active links command.
Examples
# Set the minimum number of Selected interfaces required for bringing up HDLC link bundle 1 to 5.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] bundle min-active links 5
Related commands
bundle max-active links
default
Use default to restore the default settings for an HDLC link bundle interface.
Syntax
default
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the display this command in interface view to
identify these commands, and t hen use their undo forms or follow the command reference to
individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
141