Ppp Accm; Ppp Account-Statistics Enable - H3C MSR810 Command Reference Manual

ppp accm

Use ppp accm to set the ACCM value sent to the peer on an interface.
Use undo ppp accm to restore the default.
Syntax
ppp accm hex-number
undo ppp accm
Default
The ACCM value sent to the peer is 0x000A0000 on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
hex-number: Specifies an ACCM value in hexadecimal format, in the range of 0 to 0xFFFFFFFF.
Usage guidelines
ACCM negotiation only applies to asynchronous links.
Examples
# Set the ACCM value sent to the peer to 0x01010101 on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp accm 01010101

ppp account-statistics enable

Use ppp account-statistics enable to enable PPP accounting on an interface.
Use undo ppp account-statistics enable to disable PPP accounting on an interface.
Syntax
ppp account-statistics enable [ acl { acl-number | name acl-name } ]
undo ppp account-statistics enable
Default
PPP accounting is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
acl: Specifies an ACL to match traffic. If no ACL is specified, the device generates statistics for all
PPP traffic.
acl-number: Specifies an ACL by its number in the range of 2000 to 3999, where:
14