H3C MSR810 Command Reference Manual page 372

Dropped fragments (input/output): 0/0
Unassigned fragments: 0
Bundle links:
Serial2/1/0 Physical state: Up
Table 69 Command output
Field
Bundle state
Bundle class
Fragment
MFR bundle fragment size
Original packets assembled/fragmentized
(input/output)
Dropped fragments (input/output)
Unassigned fragments
Serial2/1/0 Physical state: Up Link
state: Up Link name: Serial2/1/0
# Display detailed information about all MFR bundles and bundle links.
<Sysname> display mfr verbose
Bundle interface: MFR0/0/2
Bundle name: MFR1
Fragment: Enabled
Link state: Up
Description
Operating state of the MFR interface:
•
•
•
Bandwidth class, which is fixed at class A. A class A bundle is
brought up when one or more bundle links come up. The
bundle goes down when the last bundle link is down.
Indicates whether fragmentation is enabled.
Maximum fragment size allowed for bundle links.
Number of assembled packets on the bundle interface and
number of unfragmented packets before being sent by the
MFR interface.
Number of incoming/outgoing packets dropped on the MFR
interface.
Number of fragments that have not been assembled.
Information about a bundle link:
•
•
•
Bundle state: Up
Peer bundle name: MFR2
MFR bundle fragment size: 222 bytes
360
Link name: Serial2/1/0
Up—The interface is physically up.
Down—The interface is physically down.
Administratively down—The interface is
administratively down.
Physical layer state:
Up.

Down.

Administratively down.

Link layer state:
Add sent—The interface sent an Add_link message

and started connection establishment.
Ack rx—The interface received an Add_link

acknowledgement and is expecting an Add_link
message from the peer.
Add rx—The interface received an Add_link

message and is expecting an Add_link
acknowledgement from the peer.
Up—The bundle link was successfully negotiated,

and the interface can send frames.
Idle—The bundle link was removed.

Down—The bundle link was physically down.

Down idle—The bundle link was physically down

and removed.
The bundle link name is the name of the physical
interface by default.
Bundle class: A