Fr Compression Iphc Enable - H3C MSR810 Command Reference Manual

Field
Creation time: 2012/1/04/01 23:55:39, Status: Active
Input: 0 packets, 0 bytes, 0 dropped
Output: 0 packets, 0 bytes, 0 dropped
DE list: 3 DE set packets: 0
Traffic policing: Inactive
Input : 0 packets, 0 bytes, 0 dropped, 0 set DE
packets
Traffic shaping: Inactive
Output: 0 packets, 0 bytes, 0 dropped packets
Delayed: 0 packets, 0 bytes
Related commands
broadcast
fr dlci
fr encapsulation
fr interface-type
fr map ip
reset fr pvc

fr compression iphc enable

Use fr compression iphc enable to enable Frame Relay IPHC on a Frame Relay interface or VC.
Use undo fr compression iphc enable to disable Frame Relay IPHC on a Frame Relay interface or
VC.
Syntax
fr compression iphc enable [ nonstandard ]
undo fr compression iphc enable
Default
Frame Relay IPHC is disabled.
Views
Interface view
Frame Relay virtual circuit view
Description
Time when the PVC was created and the state of the
PVC, which can be Active or Inactive.
Number of received packets, number of received
bytes, and number of dropped packets.
Number of sent packets, number of sent bytes, and
number of dropped packets.
DE list number and number of packets with the DE
bit set.
Status of traffic policing:
• Active.
• Inactive.
Number of received packets, number of received
bytes, number of dropped packets, and number of
packets with the DE bit set.
Status of traffic shaping:
• Active.
• Inactive.
Number of sent packets, number of sent bytes, and
number of dropped packets after traffic shaping is
enabled.
Number of outgoing packets delayed and number of
outgoing bytes delayed.
332