H3C MSR810 Command Reference Manual page 216

Msr router series comware 7 layer 2 - wan access
Hide thumbs Also See for MSR810:
Table of Contents

Advertisement

Service-type: UBR, Output-pcr: 200 kbps
Transmit-Priority: 0
OAM loopback interval: 0 sec(disabled), OAM loopback retry interval: 1 sec
OAM loopback retry count (up/down): 3/5
OAM AIS-RDI count (up/down): 3/1
Interface State: UP, OAM State: UP, PVC State: UP
Input: 0 packets, 0 bytes, 0 errors
Output: 0 packets, 0 bytes, 0 errors
Output queue: (Urgent queuing : Size/Length/Discards)
Output queue: (Protocol queuing : Size/Length/Discards)
Output queue: (FIFO queuing : Size/Length/Discards)
OAM cells received: 42
F5 Loopback: 0, F5 AIS: 42, F5 RDI: 0
OAM cells sent: 0
F5 Loopback: 0
OAM cell drops: 0
Table 43 Command output
Field
ATM2/4/1
Encapsulation
Protocol
Service-type
Output-pcr
OAM loopback interval
OAM loopback retry interval
OAM loopback retry count
(up/down)
OAM AIS-RDI count (up/down)
Description
Name of the interface to which the PVC belongs.
AAL5 encapsulation type of the PVC:
SNAP—LLC/SNAP encapsulation.
NLPID—RFC1490 encapsulation.
MUX—MUX multiplexing encapsulation.
Upper-layer protocol running on the PVC:
PPP—PPP protocol.
IP—IP protocol.
ETH—Ethernet protocol.
None—No protocol is configured.
Services type: CBR, UBR, VBR-NRT, or VBR-RT.
Peak output rate of ATM cells.
Interval at which OAM F5 Loopback cells are sent.
Interval at which OAM F5 Loopback retransmission detection cells are
sent.
Number of cells that are detected as up and down in OAM detection.
Number of seconds that are detected as up in OAM AIS-RDI detection.
Number of cells that are detected as down in OAM AIS-RDI detection.
204
0/100/0
0/500/0
0/75/0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents