Pppoe-Server Virtual-Template Va-Pool - H3C MSR810 Command Reference Manual

determined by the blocking-period argument. When the timer expires, the system starts a new
round of monitoring for the user.
If the access rate setting is changed, the system removes all monitoring and blocking entries, and
uses the new settings to limit PPPoE access rates.
Examples
# Limit the rate at which a user can create PPPoE sessions on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server throttle per-mac 100 100 5
Related commands
display pppoe-server throttled-mac

pppoe-server virtual-template va-pool

Use pppoe-server virtual-template va-pool to configure a VA pool.
Use undo pppoe-server virtual-template va-pool to remove a VA pool.
Syntax
Centralized devices in standalone mode:
pppoe-server virtual-template template-number va-pool va-volume
undo pppoe-server virtual-template template-number va-pool
Distributed devices in standalone mode:
pppoe-server virtual-template template-number [ slot slot-number ] va-pool va-volume
undo pppoe-server virtual-template template-number [ slot slot-number ] va-pool
Default
No VA pool is configured.
Views
System view
Predefined user roles
network-admin
Parameters
virtual-template template-number: Specifies an existing VT interface to use the VA pool.
va-pool va-volume: Specifies the maximum number of VA interfaces contained in the VA pool, in the
range of 1 to 65534.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, a global VA pool is
created. (Distributed devices in standalone mode.)
Usage guidelines
The PPPoE server creates a VA interface for a PPPoE session to transmit packets between PPPoE
and PPP, and removes the VA interface when the user goes offline. Creating and r emoving VA
interfaces take time.
You can configure VA pools to improve the performance of PPPoE session establishment and
termination. A VA pool contains a group of automatically numbered VA interfaces. The PPPoE server
selects a VA interface from the pool for a requesting user and places the interface back to the VA pool
89