Service Standby - H3C MSR810 Command Reference Manual

Examples
# (Distributed devices in standalone mode.) Specify a primary traffic processing slot for HDLC link
bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] service slot 1
Related commands

service standby

service standby
Use service standby to specify a backup traffic processing slot for an interface.
Use undo service standby to restore the default.
Syntax
Distributed devices in standalone mode/centralized devices in IRF mode:
service standby slot slot-number
undo service standby slot
Distributed devices in IRF mode:
service standby chassis chassis-number slot slot-number
undo service standby chassis
Default
No backup traffic processing slot is specified for an interface.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device. The slot-number argument represents its IRF
member ID. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device.
The chassis-number argument refers to the ID of the IRF member device. The slot-number argument
refers to the number of the slot where the card resides. (Distributed devices in IRF mode.)
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
Command compatibility
No
No
Yes
Yes
151