H3C MSR810 Command Reference Manual page 79

display pppoe-server session packet [ interface interface-type interface-number ]
Distributed devices in standalone mode:
display pppoe-server session packet { slot slot-number | interface interface-type
interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface for centralized devices in standalone mode, the command displays packet
statistics for PPPoE sessions on all interfaces.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays packet statistics for PPPoE sessions on all cards. (Distributed devices in standalone mode.)
Examples
# Display packet statistics for PPPoE sessions on GigabitEthernet 1/0/1.
<Sysname> display pppoe-server session packet interface gigabitethernet 1/0/1
Total PPPoE sessions: 2
Ethernet interface: GE1/0/1
InPackets: 37
InBytes: 390
InDrops: 0
Ethernet interface: GE1/0/1
InPackets: 67
InBytes: 490
InDrops: 1
Table 10 Command output
Field
Ethernet interface
Session ID
InPackets
OutPackets
InBytes
OutBytes
InDrops
OutDrops
Related commands
display interface virtual-access
Session ID: 1
OutPackets: 38
OutBytes: 406
OutDrops: 0
Session ID: 2
OutPackets: 48
OutBytes: 806
OutDrops: 2
Description
Interface where the PPPoE session is present.
PPPoE session ID.
Number of packets received.
Number of packets transmitted.
Number of bytes received.
Number of bytes transmitted.
Number of discarded incoming packets.
Number of discarded outgoing packets.
67