H3C MSR810 Command Reference Manual page 255

Field
Mobile Country Code
(MCC)
Mobile Network Code
(MNC)
Location Area Code (LAC)
Cell ID
Current Band
Current RSSI
PIN Verification
PIN Status
Number of Retries
remaining
SIM Status
# Display call connection information for Cellular 2/4/0 (TD-SCDMA network).
<Sysname> display cellular 2/4/0
Cellular2/4/0:
Hardware Information:
Model: ET128
Modem Firmware Version: 11.101.01.08.00
Hardware Version:
International Mobile Subscriber Identity (IMSI): 460079011105842
International Mobile Equipment Identity (IMEI): 860039002369111
Factory Serial Number (FSN):
Modem Status: Online
Profile Information:
Profile 1: Active
PDP Type: IPv4
Description
The MCC is displayed if the modem has found a mobile network.
The MNC is displayed if the modem is successfully registered with a mobile
network.
The LAC is displayed if the modem is successfully registered with a mobile
network.
The Cell ID is displayed if the modem is successfully registered with a mobile
network.
Current band selection mode:
• GSM.
• WCDMA.
• ANY.
• AUTO.
Current RSSI:
• An RSSI value in the range of –110 dBm to –51 dBm.
• Unknown—No signal. The cellular interface is unavailable.
PIN authentication status:
• Disabled.
• Enabled.
PIN status:
• Ready—The SIM card is ready.
• PIN Requirement—Requires you to execute the pin verify command to
enter the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin unlock command
to unlock the SIM or UIM card.
Remaining retries available for entering the PIN or PUK.
SIM card status:
• OK—The SIM card is normal.
• Network Reject—The SIM card is denied access to the network. The
cellular interface is not available.
Not Insert—The SIM card is absent. The cellular interface is not
•
available.
CS31TCPU
GQ4CAB1942911350
243