H3C MSR810 Command Reference Manual page 218

Syntax
display interface [ virtual-ethernet [ interface-number ] ] [ brief [ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a VE interface by its number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of interface descriptions.
down: Displays information about interfaces in physically down state and the causes. If you do not
specify this keyword, the command displays information about interfaces in all states.
Usage guidelines
If you do not specify the virtual-ethernet keyword, this command displays information about all
interfaces on the device.
If you specify the virtual-ethernet keyword but do not specify the interface-number argument, this
command displays information about all existing VE interfaces.
Examples
# Display detailed information about VE interface Virtual-Ethernet 2/4/1.
<Sysname> display interface virtual-ethernet 2/4/1
Virtual-Ethernet2/4/1
Current state: UP
Line protocol state: UP
Description: Virtual-Ethernet2/4/1 Interface
Bandwidth: 20000kbps
Maximum Transmit Unit: 1500
Internet protocol processing: disabled
IP Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
IPv6 Packet Frame Type:PKTFMT_ETHNT_2, Hardware Address: 00e0-fc0d-9485
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
# Display brief information about VE interface Virtual-Ethernet 2/4/1.
<Sysname> display interface virtual-ethernet 2/4/1 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
VE1
# Display information about all VE interfaces in physically down state and the causes.
Link Protocol Main IP
DOWN DOWN --
206
Description