H3C MSR810 Command Reference Manual page 257

Field
Packet Session Status
Current Service Status
Network Selection Mode
Network Connection Mode
Current Network
Connection
Downstream Bandwidth
Radio Information
Current RSSI
PIN Verification
PIN Status
Number of Retries
remaining
Description
PDP status:
• Active—The modem is transmitting data through PPP.
• Inactive—The modem is physically down.
Service status of the modem:
• Service available—The modem is providing services correctly.
• Emergency—The modem is providing limited services. The cellular
interface is not available.
• No service—The modem cannot provide services. The cellular
interface is not available.
• Low power—The modem is in low power mode. The cellular interface is
not available.
Network selection mode:
• Manual.
• Automatic.
Network connection mode:
• WCDMA only—Connected to the WCDMA network only.
• WCDMA precedence—Connected to the WCDMA network with
preference.
• GSM only—Connected to the GSM network only.
• GSM precedence—Connected to the GSM network with preference.
Current network:
• No Service.
• GSM.
• GPRS.
• EDGE.
• TD-SCDMA.
• HSDPA.
Unknown.
•
Downstream bandwidth, in bps.
Radio communication information.
Current RSSI:
• An RSSI value in the range of –110 dBm and –51 dBm.
• Unknown—No signal. The cellular interface is unavailable.
PIN authentication status:
• Disabled.
• Enabled.
PIN status:
• Ready—The SIM card is ready.
• PIN Requirement—Requires you to execute the pin verify command to
enter the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin unlock command
to unlock the SIM or UIM card.
Remaining retries available for entering the PIN or PUK.
245