Interface Mp-Group - H3C MSR810 Command Reference Manual

Examples
# Display MP information. (MP is configured through an MP-group interface.)
<Sysname> display ppp mp
Template: MP-group2/0/0
max-bind: 20, fragment: enabled, min-fragment: 128
Master link: MP-group2/0/0, Active members: 2, Bundle Multilink
Peer's endPoint descriptor: MP-group2/0/0
Sequence format: short (rcv)/long (sent)
Bundle Up Time: 2012/11/05
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved
Sequence: 0 (rcv)/0 (sent)
Active member channels: 2 members
Serial2/1/0:15
Serial2/1/0:16
Inactive member channels: 2 members
Serial2/1/0:17
Serial2/1/0:18
Table 9 Command output
Field
max-bind
fragment
min-fragment
Sequence format: short (rcv)/long (sent)
reordered
unassigned
interleaved
Sequence: 0 (rcv)/0 (sent)
Up-Time

interface mp-group

Use interface mp-group to create an MP-group interface and enter its view, or enter the view of an
existing MP-group interface.
Use undo interface mp-group to remove an MP-group interface.
Syntax
interface mp-group mp-number
undo interface mp-group mp-number
Default
No MP-group interfaces exists.
07:29:33:612
Up-Time: 2012/11/05
Up-Time: 2012/11/05
Description
Maximum number of links that can be bound.
Indicates whether MP fragmentation is enabled or disabled.
Minimum size of an MP fragment.
Sequence number header format of MP. The short sequence
number format is used in the incoming direction, and the long
sequence number format is used in the outgoing direction.
Number of reassembled packets.
Number of packets waiting for being reassembled.
Number of interleaved fragments.
LFI breaks larger packets into fragments and interleaves the
fragments between smaller packets for transmission.
Received sequence number/sent sequence number.
Uptime of a member channel.
45
07:29:33:613
07:30:10:945