Bandwidth; Default - H3C MSR810 Command Reference Manual

user username: Specifies the username for authentication, a case-sensitive string of 1 to 32
characters.
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 32 characters. Its
encrypted form is a case-sensitive string of 1 to 73 characters
Examples
# Specify the CHAP authentication mode for 4G modem profile test. Specify the username as user1
and the password as 123456.
<Sysname> system-view
[Sysname] apn-profile test
[Sysname-apn-profile-test] authentication-mode chap user user1 password simple 123456
Related commands
apn-profile

bandwidth

Use bandwidth to configure the expected bandwidth for an Eth-channel interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth

Default

The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
Eth-channel interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth for an interface affects the link costs in OSPF, OSPFv3, and I S-IS. For
more information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth for Eth-channel 2/4/0:0 to 1000 kbps.
<Sysname> system-view
[Sysname] interface eth-channel 2/4/0:0
[Sysname-Eth-channel2/4/0:0] bandwidth 1000
default
Use default to restore the default settings for an Eth-channel interface.
274