Ppp Lcp Imsi Accept - H3C MSR810 Command Reference Manual

undo ppp access-control enable
Default
L2TP-based EAD is disabled.
Views
VT interface view
Predefined user roles
network-admin
Usage guidelines
This command does not apply to PPP sessions that already exist on the VT interface. It only applies
to newly created PPP sessions on the VT interface.
Different ACLs can be used for different users if the VT interface is used as the access interface for
the LNS.
L2TP-based EAD enables the LNS to transparently pass CAMS/IMC packets to the iNode client to
inform the client of EAD server information, such as the IP address.
Examples
# Enable L2TP-based EAD.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] ppp access-control enable

ppp lcp imsi accept

Use ppp lcp imsi accept to enable the client/LAC to accept the IMSI binding authentication
requests from the LNS.
Use undo ppp lcp imsi accept to restore the default.
Syntax
ppp lcp imsi accept
undo ppp lcp imsi accept
Default
The client/LAC declines the IMSI binding authentication requests from the LNS.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable the client to accept the IMSI binding authentication requests from the LNS.
<Sysname> system-view
[Sysname] interface serial 2/1/0:0
[Sysname-Serial2/1/0:0] ppp lcp imsi accept
# Enable the LAC to accept the IMSI binding authentication requests from the LNS.
<Sysname> system-view
[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp lcp imsi accept
114