H3C MSR810 Command Reference Manual page 104

Syntax
display pppoe-client session packet [ dial-bundle-number number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dial-bundle-number number: Specifies the dialer bundle number corresponding to a P PPoE
session, in the range of 0 to 1023. If you do not specify this option, the command displays the
protocol packet statistics for all PPPoE sessions.
Usage guidelines
To display the data packet statistics for a PPPoE session, use the display interface virtual-access
command to display information about the specified VA interface.
Examples
# Display the protocol packet statistics for all PPPoE sessions.
<Sysname> display pppoe-client session packet
Bundle:
InPackets: 19
InBytes:
InDrops:
Bundle:
InPackets: 18
InBytes:
InDrops:
Table 15 Command output
Field
Bundle
Interface
InPackets
OutPackets
InBytes
OutBytes
InDrops
OutDrops
Related commands
display interface virtual-access
reset pppoe-client session packet
1
816
0
2
730
0
Interface: GE1/0/1
OutPackets: 19
OutBytes: 816
OutDrops: 0
Interface: GE1/0/1
OutPackets: 18
OutBytes: 730
OutDrops: 0
Description
Dialer bundle to which a PPPoE session belongs.
Ethernet interface where the PPPoE session is present.
Number of packets received.
Number of packets transmitted.
Number of bytes received.
Number of bytes transmitted.
Number of discarded incoming packets.
Number of discarded outgoing packets.
92