Ppp Mp Short-Sequence; Ppp Mp Sort-Buffer-Size - H3C MSR810 Command Reference Manual

ppp mp short-sequence

Use ppp mp short-sequence to trigger MP short sequence number header format negotiation on
an interface. After the negotiation succeeds, the local end r eceives packets with short sequence
numbers.
Use undo ppp mp short-sequence to restore the default.
Syntax
ppp mp short-sequence
undo ppp mp short-sequence
Default
The long sequence number header format is used on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command applies to the incoming direction only. To enable the local end to transmit packets
with short sequence numbers, configure this command on the remote end.
The sequence number format (long or short) of an MP bundle depends on the configuration of the
first channel joining the MP bundle.
To negotiate the use of short sequence numbers on a dialer MP bundle, configure the command on
the dialer interfaces and the ISDN D channels. To negotiate the use of short sequence numbers on a
common MP bundle, use the command on al l its channels. The command will cause PPP
re-negotiation.
Examples
# Configure the short sequence number header format of MP in the incoming direction of Serial
2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp mp mp-group 2/0/0
[Sysname-Serial2/1/0] ppp mp short-sequence

ppp mp sort-buffer-size

Use ppp mp sort-buffer-size to set the MP sort buffer size factor on an interface.
Use undo ppp mp sort-buffer-size to restore the default.
Syntax
ppp mp sort-buffer-size size
undo ppp mp sort-buffer-size
Default
The MP sort buffer size factor is 1 on an interface.
Views
VT interface view
56