Ppp Lcp Sn String - H3C MSR810 Command Reference Manual

Use undo ppp lcp sn request to restore the default.
Syntax
ppp lcp sn request
undo ppp lcp sn request
Default
The LNS does not initiate SN binding authentication requests.
Views
VT interface view
Predefined user roles
network-admin
Examples
# Enable the LNS to initiate SN binding authentication requests.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp lcp sn request
Related commands
ppp lcp sn accept

ppp lcp sn string

ppp lcp sn string
Use ppp lcp sn string to configure the SN information on the client/LAC.
Use undo ppp lcp sn string to restore the default.
Syntax
ppp lcp sn string sn-info
undo ppp lcp sn string
Default
The client/LAC automatically obtains the SN information from its SIM card.
Views
Interface view
Predefined user roles
network-admin
Parameters
sn-info: Configures the SN information, a case-sensitive string of 1 to 31 characters.
Examples
# Configure the SN information as sn1 on the client.
<Sysname> system-view
[Sysname] interface serial 2/1/0:0
[Sysname-Serial2/1/0:0] ppp lcp sn string sn1
# Configure the SN information as sn1 on the LAC.
<Sysname> system-view
117