Profile Create - H3C MSR810 Command Reference Manual

wcdma band

profile create

Use profile create to create a profile for a 3G modem.
Syntax
profile create profile-number { dynamic | static apn } authentication-mode { none | { chap | pap }
user username [ password password ] }
Default
The default setting for this command depends on the 3G modem model.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
profile-number: Specifies a profile number. The value range varies by modem model.
dynamic: Uses an access point automatically assigned by the service provider.
static apn: Specifies the access point provided by the service provider. It is a string of 1 t o 100
characters. Whether the string is case-sensitive varies by service provider.
authentication-mode: Specifies the authentication mode, which can be none, pap, or chap.
none: Performs no authentication.
chap: Specifies CHAP authentication.
pap: Specifies PAP authentication.
user username: Specifies the username provided by the service provider. It is a case-sensitive string
of 1 to 32 characters.
password password: Specifies the authentication password provided by the service provider. It is a
case-sensitive string of 1 to 32 characters.
Usage guidelines
If you specify chap or pap, make sure the authentication settings are identical to those assigned by
the service provider.
Examples
# Create a profile for Cellular 2/4/0. Specify the profile number as 1 and the access point name as
cmnet, and specify the PAP authentication mode.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] profile create 1 static cmnet authentication-mode pap user abc
password abc
Related commands
display cellular
profile delete
267