Display Pppoe-Server Throttled-Mac - H3C MSR810 Command Reference Manual

Field
Local PPPoE sessions on slot slot-number
Ethernet interface
Session ID
PPP interface
State
RemoteMAC
LocalMAC
Service VLAN
Customer VLAN

display pppoe-server throttled-mac

Use display pppoe-server throttled-mac to display information about blocked users.
Syntax
Centralized devices in standalone mode:
display pppoe-server throttled-mac [ interface interface-type interface-number ]
Distributed devices in standalone mode:
display
| interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface for centralized devices in standalone mode,, the command displays
information about blocked users on all interfaces.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays information about blocked users on all cards. (Distributed devices in standalone mode.)
Examples
# Display information about blocked users on GigabitEthernet 1/0/1.
<Sysname> display pppoe-server throttled-mac interface gigabitethernet 1/0/1
pppoe-server
Description
Total number of PPPoE sessions on the local card's
physical interfaces (distributed devices in standalone
mode).
When an interface is specified, this field is not displayed.
Interface where the PPPoE session is present.
PPPoE session ID.
Virtual access interface created for the PPPoE session.
PPPoE session state:
• PADR RCVD—The PPPoE session is being
negotiated.
• Open—The PPPoE session has been successfully
established.
MAC address of the remote end.
MAC address of the local end.
Service provider VLAN.
N/A means no service provider VLAN is available.
Customer VLAN.
N/A means no customer VLAN is available.
throttled-mac
70
{
slot slot-number