Reset Ppp Compression Iphc; Timer-Hold - H3C MSR810 Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
This command uses PPP usernames as DHCP client IDs for DHCP pool address assignment. The
DHCP pool can be an A AA-authorized address pool or an address pool configured by using
the remote address command.
Configure this command when different users use different PPP usernames to come online and PPP
usernames are required to be used as DHCP client IDs.
Examples
# Use the PPP usernames as the DHCP client IDs on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] remote address dhcp client-identifier username

reset ppp compression iphc

Use reset ppp compression iphc to clear IPHC statistics.
Syntax
reset ppp compression iphc [ rtp | tcp ] [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
rtp: Clears IPHC RTP header compression statistics.
tcp: Clears IPHC TCP header compression statistics.
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify this option, the command clears IPHC statistics on all interfaces.
Usage guidelines
If neither rtp nor tcp is specified, this command clears both RTP header compression and TCP
header compression statistics.
Examples
# Clear IPHC statistics on all interfaces.
<Sysname> reset ppp compression iphc
Related commands
display ppp compression iphc

timer-hold

Use timer-hold to set the keepalive interval on an interface.
Use undo timer-hold to restore the default.
Syntax
timer-hold seconds
31