Hdlc Link Bundling Commands; Bandwidth; Bundle Id - H3C MSR810 Command Reference Manual

HDLC link bundling commands

bandwidth

Use bandwidth to set the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the link costs in OSPF, OSPFv3, and IS-IS. For more
information, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth to 1000 kbps for HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] bandwidth 1000

bundle id

Use bundle id to assign an interface to an HDLC link bundle.
Use undo bundle id to restore the default.
Syntax
bundle id bundle-id
undo bundle id
Default
An interface is not assigned to any HDLC link bundle.
Views
POS interface view
Serial interface view
Predefined user roles
network-admin
137