Plmn Search - H3C MSR810 Command Reference Manual

Usage guidelines
This command saves the PIN of the SIM/UIM card on the device. The PIN is used for verifying the
3G/4G modem when PIN verification is performed. You can execute this command before or after
you enable PIN verification.
Consecutive PIN verification failures might lock a SIM/UIM card. To unlock the card, execute the pin
unlock command.
Examples
# Specify the plaintext form PIN 1234 for the SIM/UIM card.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] pin verify simple 1234
Related commands
pin unlock
pin verification enable

plmn search

Use plmn search to search for available mobile networks.
Syntax
plmn search
Views
Cellular interface view
Predefined user roles
network-admin
Usage guidelines
Before you use a 3G/4G modem to access a mobile network, use the plmn search command to
search a PLMN for available mobile networks. The search takes a few minutes. After the search is
complete, the CLI displays the available mobile networks. Some 3G/4G modems automatically
access an available network. You can also specify a mobile network for the 3G/4G modem from the
available mobile networks.
Examples
# Search for mobile networks on Cellular 2/4/0.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] plmn search
PLMN search done.
Available PLMNs:
PLMN No.
01
02
03
Table 54 Command output
Field
PLMN No
MCC MNC Status
460 00 Current
460 00 Available
460 01 Forbidden
Description
PLMN number.
Type
GSM
UTRAN
GSM
259