H3C MSR810 Command Reference Manual page 254

Field
Data Compression
Packet Session Status
Diagnostics Monitor
Current Service Status
Current Service
Packet Service
Current Roaming Status
Network Selection Mode
Network Connection Mode
Current Network
Connection
Description
PDP data compression status:
• On.
• Off.
PDP status:
• Active—The modem is transmitting data through PPP.
• Inactive—The modem is physically down.
Diagnostic and monitoring (DM) status:
• Open—DM is enabled.
• Close—DM is disabled.
Service status of the modem:
• Service available—The modem is providing services correctly.
• Emergency—The modem is providing limited services. The cellular
interface is not available.
• No service—The modem cannot provide services. The cellular
interface is not available.
• Low power—The modem is in low power mode. The cellular interface is
not available.
Current service type:
• Circuit-switched—For the CS domain only.
• Packet-switched—For the PS domain only.
• Combined—For both the CS and PS domains.
• Invalid—Invalid service.
PS domain attach/detach status of the modem:
• Detached—The cellular interface is not available.
• Attached—The cellular interface is available.
Roaming status:
• Roaming.
• Home.
Network selection mode:
• Manual.
• Automatic.
Network connection mode:
• WCDMA only—Connected to the WCDMA network only.
• WCDMA precedence—Connected to the WCDMA network with
preference.
• GSM only—Connected to the GSM network only.
• GSM precedence—Connected to the GSM network with preference.
Current network:
• No Service.
• GSM.
• GPRS.
• EDGE.
• WCDMA.
• HSDPA.
• HSUPA.
• HSDPA and HSUPA.
• HSPA+.
• Unknown.
242